piston rod

英 [ˈpɪstən rɒd] 美 [ˈpɪstən rɑːd]

活塞杆

化学



双语例句

  1. Apply to reciprocating motion of hydraulic cylinder piston rod sealed device can also be used to cover the static flange seal.
    适用于液压缸活塞杆往复运动用密封装置,也可用于法兰端盖的静密封装置。
  2. Double-acting single piston rod oil cylinder
    (制动主缸内)活塞出油孔双作用单活塞杆式油缸
  3. A beam that connects the piston rod to the connecting rod of a reciprocating engine. back-side-crank pumping unit
    十字头连接活塞杆和往复式发动机连杆的横杆
  4. It's typical lip seal, which is able to gain good seal effect no matter in piston or piston rod.
    U型圈是液压缸中最常用的油封,它是一种典型的唇口密封件,无论用于活塞还是活塞杆都能获得良好的密封效果。
  5. Therefore, the fluid differential circuit can not only increase the speed of the no-load operation of the piston rod in the system, but also save energy, and prolong the service life of the system.
    因此,该流体的差动回路既可提高系统中活塞杆空载运行的速度,又可节能,延长系统使用寿命。
  6. Graphite filling offers the best bearing surface when using a hard chrome plated piston rod.
    石墨填充提供了最好的支承面时使用硬镀铬活塞杆。
  7. The orientation of the lip and the direction of the piston rod are same.
    所述唇边的朝向与活塞杆的方向相同。
  8. When tightening the fastening nut, hold at the piston rod using a7-mm open-ended wrench.
    拧紧紧固螺母时,请使用7-mm开口扳手托住活塞杆。
  9. In all designs, the valve stem normally serves as a piston rod with disc fastened directly to them.
    在所有结构中,阀杆通常作为活塞杆,阀瓣直接固定在阀杆上。
  10. The piston rod is plated with hard chromium with good abrasion resistance.
    活塞杆镀硬铬,有很好的搞磨性;
  11. Replace piston rod and add flow passage on piston rod.
    更换活塞杆,在活塞杆上增设流道。
  12. If any other requirements for piston rod head, U type ring width of cylinder lid, and diameter of pin are needed when placing an order, it is recommended to use our existing forged pieces.
    订货的场合,如果对活塞杆头、油缸盖的U形环的宽度、销子的直径等尺寸方面另有要求时,建议采用能够利用的本公司现有的模锻件。
  13. The piston rod before meet in the head the bearing to meet production pressure requirements.
    活塞杆的前接头顶在轴承座上以满足生产压力要求。
  14. The piston rod protector is widely applicable for the hydraulic vibration devices of continuous casters.
    本实用新型可以广泛应用在连铸机液压振动装置中。
  15. Hydraulic cylinders are used nickel-plated piston rod and the dust ring, sealing system uses multi-layer sealing, stable performance, no leakage.
    液压缸均采用镀镍活塞杆及防尘圈,密封系统采用多层组合密封,性能稳定不漏油。
  16. The utility model provides a pneumatic conveying device, which includes a cylinder body, a piston rod, a piston seal, air storage chambers on two sides, a reverser, and each inside passage.
    本实用新型提供一种气动输送装置,包括缸体、活塞杆,活塞封,两侧的储气室,换向器,各内部通路。
  17. The material offers an excellent bearing surface with hard chrome plated piston rod.
    提供的材料镀硬铬活塞杆表面良好的关系。
  18. It is also possible to counter at the piston rod with countering tool at the same time!
    也可同时在活塞杆处用反向工具顶住!
  19. Piston Rod: Hardened electroless nickel plated corrosion resistant, durable low wearing surface.
    活塞杆:镀镍硬化耐腐蚀,经久耐用低磨损表面。
  20. Worn crankcase piston rod seals.
    曲轴箱连杆密封件损坏。
  21. Fracture failure analysis of piston rod of the hydraulic damper on a certain light vehicle
    某轻型车辆液力减震器活塞杆断裂失效分析
  22. Hard-chromed piston rod with micro-grooves, increasing the rigidity and reducing friction, keep better lubrication action.
    活塞杆微裂纹镀硬铬,增因硬度减少磨擦,保持油膜润滑效果值。
  23. The utility model could not only be used in electric stove swaying cylinder but also could be used in other cylinder in a high temperature environment to protect piston rod.
    本实用新型不仅用在电炉横移油缸上,也可以用于其他高温环境的油缸上用于保护活塞杆。
  24. The piston rod steering structure analysis of disc type deburrer for billets
    连铸坯圆盘式去毛刺机活塞杆导向结构分析
  25. An oscillating lever connected to an engine piston rod and used to transmit power to the crankshaft.
    可摆动的杠杆,与引擎之活塞相连,用以向机轴传送能量。
  26. This will result in the fatigue fracture of the piston rod.
    这样活塞杆就会产生疲劳断裂。
  27. Due to the clamped joint, the susceptible piston rod thread is superfluous and the notch effect and danger of cracks are no longer given.
    由于采用了该夹紧接头,无需易变的活塞杆螺纹,也不再给出切口效应和裂缝危险。
  28. The locking sleeve is provided with an adjusting device automatically aligning the piston rod.
    所述止动套设有对活塞杆自动找正的调节装置。
  29. Reliability Analysis and Parametric Design of Piston Rod of a Reciprocating Compressor
    往复式压缩机活塞杆可靠性分析与参数化设计
  30. Hard chrome plated, turned ground and polished, high strength steel ( 100,000 psi minimum yield) piston rod provides maximum life of the bearing and seals.
    硬镀铬,把地面和抛光,高强度钢(100000防扩散的最低收益率)活塞杆提供了最大的轴承和密封寿命。

英英释义

noun

  1. connecting rod that moves or is moved by a piston